Sustainability · 2024
In this section53 topics
- Sustainability Policy2 items
- Sustainability Goals & UN SDGs3 items
- Policy Review3 items
- Business Value Chain1 item
- Stakeholder Analysis2 items
- Environmental Sustainability — Overview1 item
- Environmental Policy & Guidelines3 items
- Environmental Policy Review3 items
- Energy — Plan & Guidelines2 items
- Energy — Electricity Consumption1 item
- Energy — Fuel Consumption1 item
- Energy — Targets2 items
- Energy — Performance & Outcomes2 items
- Water — Plan & Guidelines2 items
- Water — Withdrawal, Discharge & Consumption1 item
- Water — Targets3 items
- Water — Performance & Outcomes2 items
- Waste Management — Overview1 item
- Waste — Plan & Guidelines2 items
- Waste — Generation, Disposal & Recycling1 item
- Waste — Targets3 items
- Waste — Performance & Outcomes2 items
- GHG — Plan & Guidelines2 items
- GHG — Emissions1 item
- GHG — Emissions Verification3 items
- GHG — Targets2 items
- GHG Targets — Net Zero1 item
- GHG Targets — Carbon Neutrality1 item
- GHG — Performance & Outcomes2 items
- Environmental Legal Incidents1 item
- Other Environmental Management2 items
- Social Sustainability — Overview1 item
- Social Policy & Guidelines3 items
- Social Policy Review1 item
- Social — Principles & Standards Practised1 item
- Human Rights Due Diligence2 items
- Employees — Plan & Guidelines4 items
- Employees — Workforce1 item
- Employees — Remuneration & Provident Fund1 item
- Employees — Training & Development1 item
- Employees — Occupational Health & Safety1 item
- Employees — Labour Relations1 item
- Employees — Employee Representation2 items
- Employees — Targets2 items
- Employees — Performance & Outcomes1 item
- Customers — Plan & Guidelines3 items
- Customers — Satisfaction Results1 item
- Customers — Targets2 items
- Customers — Performance & Outcomes2 items
- Community & Social — Plan & Guidelines3 items
- Community & Social — Targets2 items
- Community & Social — Performance & Outcomes2 items
- Law Violation Incidents1 item
Sustainability Policy
Has a Sustainability Policy
Yes
Policy Description
Sustainable Development Policy
Thai Rubber Latex Group Public Company Limited is committed to developing and driving the business towards sustainability. The Company will focus on conducting business with responsibility in three main areas: Environment, Social, and Governance (ESG), in accordance with international standards. To enable the Company to adapt and develop its business to survive and grow sustainably in a business environment that faces many problems and challenges, as well as to create long-term value for the business and create value or benefits for stakeholders, the Board of Directors has established policies and goals for sustainable business operations to serve as a framework and guidelines for operations as follows:
1. The Company will conduct its business sustainably under good corporate governance based on honesty, fairness, transparency, disclosure, verifiability, and accountability, with key supporting systems including risk management, internal control, information communication, monitoring, and review.
2. Adhere to and comply with the guidelines and practices set forth in the Company's regulations and code of conduct, including policies related to sustainable development.
3. Apply the concepts and principles of sustainable business to the management of the value chain and relationships with stakeholders throughout the business value chain.
4. Establish environmental policies and practices that reflect a commitment to reducing environmental impacts on stakeholders throughout the business value chain.
5. Establish social policies and practices that reflect a commitment to conducting business with respect for human rights and responsibility to stakeholders, communities, and society throughout the business value chain.
6. Continuously and consistently instill awareness and culture of environmental protection and social responsibility among employees and stakeholders.
7. Develop and promote organizational innovation and new technologies as business strategies to add value to the business and the long-term growth of the organization.
8. Encourage and support stakeholders throughout the business chain to conduct business in accordance with sustainable development guidelines.
9. Disclose corporate governance and sustainable business information to investors and other stakeholders.
Sustainability Policy
Economic Dimension
• Conduct sustainable business under good corporate governance based on honesty, fairness, transparency, disclosure, verifiability, and accountability.
• Develop and promote organizational innovation and new technologies to add value to the business and the long-term growth of the organization.
Social Dimension
• Conducting business with respect for human rights and responsibility to stakeholders throughout the business value chain.
Environmental Dimension
• Conduct business under environmental policies and practices that reflect a commitment to reducing environmental impacts on stakeholders throughout the business value chain.
Policy Practices
The Company has a Board of Directors that supports and drives the development of the business towards sustainability, and an Executive Committee that is responsible for formulating sustainable development policies covering the environment, society, and corporate governance for the management to implement. The aim is to manage the value chain of the business, build relationships with stakeholders, manage negative impacts on stakeholders, manage sustainability in the environmental dimension, including energy use, water use, waste and pollution management, greenhouse gas reduction management, social and human rights policies, customer responsibility, community and social responsibility, ecosystem protection and restoration, biodiversity, innovation promotion, and value creation, sustainable business operations under good governance and anti-corruption, respect for and compliance with universal human rights.
Therefore, to demonstrate and commit to developing the organization towards sustainability, the Company has set up a working group to propose projects to promote knowledge, gather information, and report on the results of various operations with the goal of "being a leader in innovation in the global concentrated latex industry by creating quality products that are environmentally and socially friendly and developing new innovations for the sustainability and stability of the business."
Sustainability Management Structure
TRUBB has established a sustainability management structure consisting of the Executive Committee, advisors, and a working group on the process of organizational development towards sustainability from representatives of all departments, ranging from management to the operational level.
Board of Directors
• Oversee the development of the organization towards sustainability in line with the United Nations Sustainable Development Goals (SDGs). • Establish organizational sustainability management policies and goals in terms of the environment to reduce impacts on stakeholders.
• Establish quality, environmental, occupational health, and safety policies.
• Establish an energy management policy.
• Establish a policy to demonstrate a commitment to operating in accordance with FSC principles.
• Establish a policy to promote quality and labor protection.
• Establish a policy to develop and promote organizational innovation.
• Provide advice and make decisions related to organizational development towards sustainability.
Working Group
• Implement policies to ensure the effectiveness of sustainable development.
• Plan for organizational development towards sustainability.
• Present sustainability plans and projects to the Executive Committee for consideration.
• Monitor and collect departmental sustainability performance and report to the Executive Committee.
• Prepare a sustainability report.
• Disclose sustainability performance through various media and the Company's website.
Department
• Perform work according to assigned plans.
• Data collection within the agency
Tax Operations
Thai Rubber Latex Group Public Company Limited and its subsidiaries ("the Company") recognize the importance of tax to sustainable development. Responsible taxpaying is essential for national development and economic growth. The Company has therefore established a "Tax Policy" to conduct business ethically and transparently and in accordance with good corporate governance principles, with details disclosed on the Company's website.
Investment Promotion Privileges
The Group has received investment promotion certificates from the Board of Investment for rubber products and therefore enjoys several benefits, including corporate income tax exemptions and/or reductions for net profits derived from the promoted activities.
Unit: Thousand Baht
Revenue from promoted activities 1,036
Profit exempted from tax from investment promotion -
Sustainability Goals & UN SDGs
Has Sustainability Goals
Yes
Goals Description
TRUBB has set important sustainability goals that link the organization's sustainability performance to the United Nations Sustainable Development Goals (SDGs) as follows:
Sustainable Development Goals
The company has set environmental, social and governance goals by 2030, starting with a baseline year of 2023
Environmental
Climate change risks
• Climate risk assessments are conducted, describing the potential impacts on business operations on a regular basis.
• Develop goals, plans and measures to mitigate climate change risks (FBE-E4.2) Greenhouse Gas Management
• Corporate carbon footprint including Scope 1 and 2 (E5.2C) Carbon Neutral
• Corporate carbon footprint including Scope 1, 2 and 3 (E5.4R) Carbon Neutral
• Greenhouse gas emissions per unit (Carbon Intensity) (E5.6R) reduced by 8% Waste and Pollution Management
• Amount of waste (general) and waste (E4.2C) Zero waste to Land fill
• The amount of waste and waste that goes through the Reuse/Recycle process (E4.4R) increased by 30%. Biodiversity and Deforestation
• Have policies and practices on biodiversity conservation and deforestation. Covering the business process and the company's supply chain (FBE-E2.1)
• Assessing the risks and impacts on biodiversity from business operations (FBE-E2.2) Energy Management
• Renewable energy consumption (E2.3C) reduced by 40%
• Energy consumption per unit (Energy Intensity) (E2.5R) reduced by 15% Environmental Management Standards Water Management
• Water consumption per unit (Water Intensity) (E3.4R) reduced by 15%
Social
Human Rights Management
• No complaints of human rights violations from employees, workers and trading partners
Responsibility to customers
Customer satisfaction level
• 85% of customers in the country
• 90% international customers
Occupational safety, health and working environment
• No fatalities from work
Fair Labor Practices
• No incidents or complaints of violations of rights, equality and unfair labor practices and have remedies and remedies (AGR-S2.3)
Respect for Diversity and Equality
• Have policies and practices regarding respect for diversity and equality within the organization and supply chain without discrimination based on gender, age, nationality, disability, religion or other status (AGR-S2.2)
Employee Development
• Employee training hours 12 hours/person
Social and Community Responsibility
• 30 community beneficial activities
Economic
Sustainability Risk Management
Responsible Sourcing
Sustainable Supply Chain Management
Innovation Development
Good Corporate Governance
• Corporate Governance Assessment by the Thai Institute of Directors Association 5 stars
• No claims or disputes regarding unfair competition
• No claims or disputes regarding property infringement.
UN Sustainable Development Goals
| SDG Goal |
|---|
| Goal 2 Zero Hunger |
| Goal 4 Quality Education |
| Goal 6 Clean Water and Sanitation |
| Goal 7 Affordable and Clean Energy |
| Goal 8 Decent Work and Economic Growth |
| Goal 9 Industry, Innovation and Infrastructure |
| Goal 10 Reduce Inequalities |
| Goal 12 Responsible Consumption and Production |
| Goal 13 Climate Action |
| Goal 15 Life on Land |
| Goal 16 Peace, Justice and Strong Institutions |
| Goal 17 Partnerships for the Goals |
Policy Review
Policy Reviewed This Year
Yes
Policy Changed This Year
Yes
Review Details
The Company reviews its material sustainability issues annually by studying and comparing the material issues identified in the previous year and emerging issues during the year. This is done by analyzing the impacts of the Company's business operations throughout the value chain that need to be managed to minimize or eliminate impacts. It also involves managing the expectations and responsiveness of all stakeholder groups, managing risks from the severity of unpredictable natural events due to climate change, and enforcing regulations and international trade conditions that will become more stringent each year. The review of material sustainability issues must be conducted annually to address various risks and enhance the organization's sustainability.
Identifying material sustainability processes is crucial in setting the direction and planning the organization's sustainability development strategy. The main steps are as follows:
1. Identifying Sustainability Issues: Considering information from various sources such as GRI Standards, SET ESG Rating Sustainability Indicators for the agricultural business, industry trends, relevant laws and regulations, and stakeholder expectations throughout the value chain to identify sustainability issues that impact the business and stakeholders.
2. Assessing the Importance of Issues: Analyzing the importance of each issue, considering the impact on the business in terms of environment, society, and economy, as well as the impact on stakeholders.
3. Prioritizing Issues: Using the Materiality Matrix tool to identify the most critical issues.
4. Determining Materiality: Selecting material issues from the prioritization to define the organization's material sustainability issues to focus on strategy and operations for organizational sustainability.
5. Review and Update: Review and update the organization's material sustainability issues annually to keep pace with changes in the current business environment, meet stakeholder expectations, and align with the organization's direction. Summarize key sustainability issues and assess their importance to the business and stakeholders. There are 18 issues as follows:
Environmental Aspects
1. Climate Change Risk
2. Greenhouse Gas Management
3. Energy Management
4. Waste and Waste Management
5. Water Management
6. Biodiversity and Deforestation
7. Compliance with Environmental Management Standards
Social Aspects
8. Human Rights Practices
9. Customer Responsibility
10. Occupational Safety, Health, and Working Environment
11. Fair Labor Practices
12. Employee Development
13. Community and Social Responsibility
Economic Aspects
14. Sustainability Risk Management
15. Responsible Sourcing
16. Sustainable Supply Chain Management
17. Innovation Development
18. Corporate Governance
Business Value Chain
Value Chain Description
TRUBB is committed to sustainable business practices while creating value for all stakeholders with minimal impact on the environment and society. Activities throughout the value chain range from sustainable sourcing, managing production processes to meet international standards, using environmentally friendly packaging, managing transportation to reduce impacts on society and the environment, delivering quality products, and providing responsible after-sales service. The company operates with care to meet the expectations of all stakeholders and is also part of supporting the Sustainable Development Goals (SDGs), 17 goals of the United Nations, that all sectors must work together.
Production Factors Management
TRUBB operates under an efficient, fair, and transparent procurement process to obtain good quality raw materials. The company conducts business with partners who adhere to good corporate governance principles and are socially and environmentally responsible, such as being responsible for the occupational health and safety of employees, respecting human rights, managing energy and water, etc. Guidelines for business partners are established, along with performance monitoring to meet standards, and risk assessments for key raw materials used in production.
In addition, the company has assigned Thai Rubber Land and Plantation Co., Ltd., a subsidiary responsible for supplying fresh latex, a key raw material in the production of concentrated latex, to implement sustainable rubber plantation management according to FSC-FM (Forest Stewardship Council TM) standards in Chiang Kham District, Phayao Province, and to establish organic rubber plantations in Mae Chan District, Chiang Rai Province, to produce and deliver valuable raw materials to the company's production department for the production of valuable products to be delivered to customers.
Product Manufacturing
TRUBB controls the quality of its products to meet international standards, covering the environment, safety, and consumers, such as ISO9001, ISO14001, and IEC17025, which is a Standard Lab certification for rubber testing. Resources, energy, and water are used efficiently and managed for maximum benefit without causing pollution to society and the environment. The company uses renewable energy, installs an efficient wastewater treatment system, develops innovations and production technologies, and strictly adheres to occupational health and safety practices.
Shipping and Distribution
TRUBB is committed to maintaining and delivering quality and valuable products to customers. With an efficient transportation and distribution system, products are delivered on time as scheduled by customers. Transportation routes are planned for maximum effectiveness. There is both outbound and inbound transportation to reduce empty trips, as well as managing potential impacts on society, the environment, and communities arising from the transportation process.
Marketing and Sales
TRUBB delivers valuable and quality products to customers through efficient distribution channels. The company communicates and raises awareness among customers about its responsibility for products, society, and the environment. TRUBB builds good relationships with customers, listens to feedback and suggestions, and cooperates with customers in providing information related to sustainability management, especially in the areas of Climate Change and Water Security.
After-Sales Service
TRUBB is committed to customer responsibility and after-sales service by building relationships with customers, listening to and addressing complaints and suggestions received from customers, taking into account appropriateness and feasibility to maintain a balance of expectations from various parties. The company studies and analyzes customer needs to continuously develop new products and businesses. Customer satisfaction surveys and personal data management are conducted to build confidence among customers who choose to use the company's quality and valuable products as raw materials in their production.
Core Activities and Support Activities in the Business Value Chain
Core Business Activities
Production Factors Management
• Management of production factors, responsible sourcing of raw materials
• Establish sustainable rubber plantation standards
• Organic rubber plantations (IFOAM)
• Organic rubber plantations (USDA)
• Sustainable rubber plantation management Forest Stewardship Council - Forest Management (FSC-FM)
• Global Organics Standard Latex
• Sourcing fresh latex from deforestation-free sources
Operations
• Raw material conversion and the use of environmentally friendly packaging
• Manage production quality to meet international standards.
- Forest Stewardship Council
- Chain of Custody (FSC-COC)
- Global Organics Standard Latex
- ISO9001
- ISO14001
- ISO17025
• Sustainable environmental management
• Coping with climate change and managing greenhouse gases
• Waste management
• Water management
• Energy management
Transportation
• Manage on-time delivery as scheduled by customers.
• Planning transportation routes for maximum efficiency
• Managing environmental and social impacts from transportation processes
Marketing and Sales
• Setting appropriate selling prices
• Delivering quality products
• Develop distribution channels to reach customers both domestically and internationally.
After-Sales Service
• Product warranty and satisfaction
• Continuously develop good relationships with customers with dedicated customer service staff.
• Have a channel for feedback or suggestions about products directly from customers.
Support Activities
Procurement
• Have fair procurement regulations
• Announcing a code of business ethics for partners
• Sustainable supply chain management by incorporating ESG assessments into procurement
Technology Management
• Research and development projects for innovation to add value to products according to the BCG Model concept
• Intellectual property management
• Using AI in management
Human Resource Management
• Treating workers fairly in accordance with human rights principles
• Employee development
• Recruitment, selection, compensation
• Occupational health and safety care
• Employee welfare care
• Comprehensive human rights assessment
Infrastructure
• Have an organizational structure and resources in place to achieve goals.
Stakeholder Analysis
Introduction
TRUBB has identified stakeholders throughout the value chain who have both direct and indirect business relationships. Communication channels have been established to allow everyone to participate in providing suggestions for developing sustainability strategies. This is beneficial for risk analysis, opportunities for business development to create value, and increasing the ability to respond to stakeholder expectations appropriately. The goal is to reduce negative impacts and promote positive impacts on stakeholders to build sustainable relationships with each other.
Stakeholder Analysis
| Stakeholder Type | Stakeholders | Stakeholder Expectations | Response to Expectations | Communication Activities |
|---|---|---|---|---|
| External stakeholders | 2911 · Description: Raw material distributors | - Fair and consistent purchase prices for natural rubber
- Technological and knowledge support | - Trading prices are based on daily market prices.
- There are events that provide relevant knowledge. | 2941 · Description: Online Communication · 2949 · Other name: Group tapping at the latex collection point · Description: Others |
| External stakeholders | 2936 · Other name: Supplier / Transportation Service Provider and Others · Description: Others | - Transparency in supplier selection, emphasizing mutual benefits.
- Strict adherence to the "Supplier Code of Conduct".
- Collaborative development of suppliers to meet international standards.
- Timely payment terms as per contractual agreements. | - Transparency in supplier selection, emphasizing mutual benefits.
- Strict adherence to the "Supplier Treatment" policy.
- Collaborative development of suppliers to meet international standards.
- Timely payment terms as per contractual agreements. | 2938 · Description: Visit · 2945 · Description: Complaint Reception · 2949 · Other name: Joint activities · Description: Others |
| External stakeholders | 2894 · Description: Creditor | - Strict adherence to contractual terms.
- Ability to fully and promptly meet financial obligations.
- Fair and equal treatment of all creditors. | - Strictly adheres to contract terms and conditions.
- Provides transparent financial disclosures. | 2942 · Description: Internal Meeting · 2949 · Other name: Contact the Finance and Accounting Department manager directly. · Description: Others |
| External stakeholders | 2913 · Description: Shareholders | - Conduct business with transparency, adhering to good governance principles and business ethics.
- Ensure compliance with the European Union Deforestation-free Regulation (EUDR).
- Receive appropriate and fair returns on investment.
- Communicate and publicize the company's operations to the public. | - There are various committees and working groups as specified by the PLC.
- Information can be provided to clarify any doubts directly.
- The profit and loss statements are audited and certified by a third party.
- Strict adherence to business ethics is practiced.
- Investing in new technologies to enhance management capabilities. | 2941 · Description: Online Communication · 2944 · Description: Annual General Meeting (AGM) · 2949 · Other name: Investor Relations Officer · Description: Others · 2949 · Other name: Online Feedback and Complaint Channels · Description: Others |
| Internal stakeholders | 2921 · Description: Employees | - Receive fair benefits and compensation.
- Receive skill development opportunities based on career paths or needs.
- Opportunities for career growth.
- Job security and succession planning.
- Workplace safety. | - Remuneration and benefits are competitive within the same industry.
- Training is provided to develop skills according to job functions or needs.
- Opportunities are given to those who are capable and ready to succeed in vacant positions.
- Provide safety equipment to protect against hazards at work. Take care of occupational health and safety and the environment in the workplace.
- Prepare a safety manual for the workplace. | 2941 · Description: Online Communication · 2946 · Description: Employee Engagement Survey · 2949 · Other name: Participation in team-building activities through various projects · Description: Others · 2949 · Other name: Feedback or suggestions can be submitted through various channels, such as group meetings, suggestion boxes, direct supervisor consultations, email, Line, and Facebook. · Description: Others |
| External stakeholders | 2923 · Description: Customers | - Delivering the right quality products, complete and on time
- Respond to and resolve complaints quickly
- Operate in accordance with international standards for environmental management and human rights management
- Ability to operate under international trade conditions such as EUDR | - Establish standard systems for production, inspection, delivery according to customer specifications or international standards.
- Participate in analyzing problems with customers based on complaints.
- Develop a comprehensive traceability and risk management system in accordance with EUDR conditions. | 2938 · Description: Visit · 2947 · Description: Satisfaction Survey · 2949 · Other name: Invest in new technologies to enhance competitiveness in international markets. · Description: Others |
| External stakeholders | 2893 · Description: Farmers | - Fair purchase price for fresh latex
- Consistent trading practices
- Access to knowledge and technological support to enhance the quality of rubber production and meet market demands
- Participation in community development | - Reference trading price based on daily market price
- Organize knowledge sharing activities
- Establish joint committees or hold meetings to gather feedback and suggestions
- Provide training on rubber tree planting techniques
- Maintenance and yield enhancement
- Support various community projects | 2945 · Description: Complaint Reception · 2949 · Other name: Communication through farmer representatives / Latex collection points · Description: Others |
| External stakeholders | 2931 · Description: Government agencies and Regulators | - Strict compliance with laws, regulations, and requirements mandated by the government, the United Nations, or the community.
- Participation in environmental preservation and community development. | - Study and understand laws and regulations and strictly comply with them.
- Comply with the Code of Conduct. | 2941 · Description: Online Communication · 2945 · Description: Complaint Reception · 2949 · Other name: Participate in meetings with government agencies to discuss and exchange views. · Description: Others |
| External stakeholders | 2902 · Description: Community · 2928 · Description: Society | - Conducting business with integrity, without causing negative impacts on communities and the environment.
- Promoting, developing, and supporting the community's economy to improve livelihoods, create jobs, and ensure stability.
- Providing care and assistance to communities, schools, temples, and religious places as needed. | - Environmental impact assessments are conducted.
- Advanced machinery is employed in production to minimize environmental impact.
- Local community members are hired as employees.
- The "Thai Rubber, Alleviating Poverty" project is implemented to generate income for schools within the community.
- Training is provided on rubber tapping techniques and rubber plantation maintenance. | 2945 · Description: Complaint Reception · 2949 · Other name: There are representatives to listen to problems and complaints from the community, including participation in various activities. · Description: Others |
| External stakeholders | 2900 · Description: Business partners | - Has funding for research and development of new products.
- Reputation and work are recognized in related business/academic circles, enabling mutually beneficial collaborations. | - Allocate budget for new innovative research projects.
- Promote projects or achievements through the annual sustainability report and the company's website. | 2949 · Other name: Joint Research and Development Project for Concentrated Latex with King Mongkut's University of Technology Thonburi · Description: Others |
Environmental Sustainability — Overview
Operating Results — Introduction
Implementing greenhouse gas emissions data recording, Scope 1 and Scope 2, in accordance with the requirements for calculating and reporting the organization's carbon footprint, by the Greenhouse Gas Management Organization. This covers the greenhouse gas emissions data of the head office and five concentrated latex factories: Surat Thani Factory, Hat Yai Factory, Chonburi Factory, Rayong Factory, and Chiang Rai Factory.
Environmental Materiality
• Climate Change Risks
• Greenhouse Gas and Energy Management
• Waste and Waste Management
• Water Management
• Biodiversity and Deforestation
• Compliance with Environmental Management Standards
Environmental Standards
To ensure that basic environmental operations meet international standards, TRUBB has implemented the ISO 14001:2015 Environmental Management System to manage the environment continuously. The company has set a goal for all concentrated latex factories to be certified with the ISO 14001 Environmental Management System. In 2023, four out of five factories have been certified with ISO 14001. This serves as a tool to assure stakeholders that TRUBB is committed to conducting business without impacting the environment.
Environmental Policy & Guidelines
Has an Environmental Policy
Yes
Policy Description
Thai Rubber Latex Group Public Company Limited recognizes the current environmental situation, which is considered a serious crisis, affecting the quality of life of people in society and limited natural resources. The company has therefore established an environmental management policy to serve as a guideline for managing environmental impacts arising from the company's business operations and to comply with the sustainable development policy as follows:
1. Committed to complying with environmental laws and other related regulations.
2. Use energy efficiently and manage it for maximum efficiency, including choosing to use clean energy or alternative energy to replace fossil fuels.
3. Reduce energy consumption and chemicals that cause greenhouse gas emissions.
4. Use water efficiently and manage it for maximum efficiency, especially when using water sources shared with the community. Water management must be ethical and take into account community rights.
5. Dispose of industrial waste and wastewater correctly and efficiently, without impacting the community and the environment.
6. Manage garbage and plastic waste properly and efficiently, without impacting stakeholders and the environment.
7. Appropriately manage air pollution, water pollution, noise pollution, vibration, hazardous waste, and ensure no impact on stakeholders and the environment.
8. Promote a corporate culture that instills awareness in the value of energy and water conservation, environmental protection, ecosystem restoration, and biodiversity.
Environmental Guidelines
| Guideline |
|---|
| Electricity Management |
| Fuel Management |
| Renewable/Clean Energy Management |
| Water Management |
| Waste Management |
| Biodiversity Management |
| Greenhouse Gas and Climate Change Management |
Environmental Policy Review
Policy Reviewed This Year
Yes
Review Details
Thai Rubber Latex Group Public Company Limited recognizes the current environmental situation, which is considered to be a serious crisis, affecting the quality of life of people in society and limited natural resources. The company has therefore established an environmental management policy to serve as a guideline for managing the environmental impacts arising from the company's business operations and to comply with the sustainable development policy as follows:
1. Committed to complying with environmental laws and other relevant regulations.
2. Energy is used efficiently and managed for maximum efficiency, including the selection of clean energy or renewable energy to replace the use of fossil fuels.
3. Reduce the use of energy and chemicals that cause greenhouse gas emissions.
4. Water is used efficiently and managed for maximum efficiency, especially in cases where water sources are shared with the community. Water management must be ethical and take into account community rights.
5. Industrial waste and wastewater are disposed of properly and efficiently, without impacting the community and the environment.
6. Waste and plastic waste are managed properly and efficiently, without impacting stakeholders and the environment.
7. Air pollution, water pollution, noise and vibration pollution, and hazardous waste pollution are properly managed without impacting stakeholders and the environment.
8. Promote a corporate culture that instills awareness in the efficient use of energy and water, environmental conservation, and the protection and restoration of ecosystems and biodiversity.
Policies & Guidelines Changed
| Change |
|---|
| Electricity Management |
| Fuel Management |
| Renewable/Clean Energy Management |
| Water Management |
| Waste Management |
| Biodiversity Management |
| Greenhouse Gas and Climate Change Management |
Energy — Plan & Guidelines
Has an Energy Management Plan
Yes
Plan Description
Energy Management
In energy management administration, TRUBB has established guidelines for all employees to participate in energy conservation within the organization as follows:
1. Define energy conservation as part of the organization's operations.
2. Improve the efficiency of the organization's energy resource utilization to be suitable for the business.
3. Establish an energy conservation plan and review and update it annually.
4. Energy conservation is the responsibility of executives and employees at all levels of the company.
5. Support human resources, budget, and training to develop energy efficiency.
6. Committed to complying with laws related to energy conservation and energy management.
Significant activities in energy management were carried out in 2023.
1. Solar Cell project to replace electricity from fossil fuels.
2. Project to change and improve machinery to increase production efficiency and reduce energy consumption.
3. Other activities within the organization that will help raise awareness among employees to participate in reducing electricity consumption in the business.
Energy — Electricity Consumption
Electricity Consumption
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Total electricity consumption within the organization (Kilowatt-Hours) | 10,865,207 | 12,650,400.57 | 13,329,539 |
| Electricity purchased for consumption from non-renewable energy sources (Kilowatt-Hours) | 10,778,197 | 12,650,400.57 | 13,329,539 |
| Electricity purchased or generated for consumption from renewable energy sources (Kilowatt-Hours) | 87,010 | 0 | 0 |
Energy — Fuel Consumption
Fuel Consumption
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Crude oil (Barrels) | |||
| Coal (Metric tonnes) | |||
| Jet fuel (Litres) | |||
| Diesel (Litres) | 167,695.64 | 204,695.95 | 234,592 |
| Gasoline (Litres) | 18,418.86 | 18,539.48 | 16,845 |
| Fuel oil (Litres) | |||
| Natural gas (Standard cubic feet) | |||
| LPG (Kilograms) | 118,185 | 126,620.6 | 66,308.6 |
| Steam (Metric tonnes) |
Energy — Targets
Has Set Targets
Yes
Targets
| Target | Base Year | Base Year Value | Target Year | Target Change (%) | Unit |
|---|---|---|---|---|---|
| Reduction of electricity purchased for consumption | 2,023 | 126.36 | 2,030 | 15 | Kilowatt-hour |
| Increase of electricity consumption from renewable energy sources | 2,023 | 6,401 | 2,030 | 40 | Kilowatt-hour |
Energy — Performance & Outcomes
Has Performance Results
Yes
Performance Description
The project utilizes solar energy from solar cells to replace electricity, reducing the proportion of electricity generated from fossil fuels, which are a source of greenhouse gas emissions from combustion. By partially replacing energy consumption with solar energy, we contribute to environmental preservation.
Target
2030 : Ratio of electricity consumption from fossil fuels to solar energy = 60:40
Action Plan
Install Solar Cells in 5 locations within 2026
• Head Office Building
• Hat Yai Factory
• Surat Thani Factory
• Rayong Factory
• Chiang Rai Factory
Operation Progress
• Installed and activated the Solar Rooftop system at the head office since December 2023 onwards.
• Solar Rooftop installation will be completed in December 2024 and the system will be tested and operational in January 2025.
Since the installation of the Solar Rooftop at the head office in December 2023, the company has reduced its electricity consumption from fossil fuels compared to 2023 and 2022. The company has been able to reduce electricity consumption from fossil fuels by 93,608 kilowatt-hours, or 37.46 percent.
Water — Plan & Guidelines
Has a Water Management Plan
Yes
Plan Description
In the production of concentrated latex, "water" is a crucial factor. As the world faces climate change, leading to drought and water scarcity, the company has established a sustainable water management approach. This approach adheres to the 3Rs principle to ensure the most efficient use of water resources, implementing effective preventive measures and impact mitigation.
Water — Withdrawal, Discharge & Consumption
Water Withdrawal, Discharge & Consumption
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Total water withdrawal (Cubic meters) | 316,727.64 | 348,868.94 | 372,208.3 |
| Total water withdrawal by third-party water (Cubic meters) | 2,043 | 35,914 | 31,521 |
| Total water withdrawal by surface water (Cubic meters) | 169,499.04 | 197,079.64 | 200,794.7 |
| Total water withdrawal by groundwater (Cubic meters) | 145,185.6 | 115,875.3 | 139,892.6 |
| Total water withdrawal by seawater (Cubic meters) | |||
| Total water withdrawal by produced water (Cubic meters) | |||
| Percentage of wastewater treated before discharge (%) | |||
| Total water discharge (Cubic meters) | |||
| Total water discharge to third-party water (Cubic meters) | |||
| Total water discharge to surface water (Cubic meters) | |||
| Total water discharge to groundwater (Cubic meters) | |||
| Total water discharge to seawater (Cubic meters) | |||
| Total water consumption (Cubic meters) | 316,727.64 | 348,868.94 | 372,208.3 |
| Recycled water (Cubic meters) | 8,078.4 | 18,864.2 | 0 |
Water — Targets
Introduction
Objectives
• Reduce water resource consumption by 8% by 2026.
• No risk of water scarcity.
• 100% water recirculation.
• No discharge of water into public water sources.
Sustainable water management approach based on the principles of Reduce, Reuse, Recycle.
Water Resource Management
• Creating raw water reserves to provide water during water shortage crises.
• Monitoring water situations and assessing the risk of water scarcity.
• Reduce the amount of raw water drawn, treat and recirculate water for use in the factory.
• Utilizing innovation and technology to enhance water resource utilization efficiency for maximum benefit.
• Control and monitor the use of raw water for production.
Wastewater Management
• Monitoring and controlling wastewater treatment to meet legal standards and environmental regulations.
• Wastewater treatment, focusing on recirculation for reuse within the factory.
• 100% no discharge of water into community water sources.
• Utilizing technology to enhance the efficiency of water resource treatment. Community Relations
• Collaborate with external agencies to conserve water sources surrounding the factory area.
• Coordinate with local communities to support the development and improvement of community water sources.
Has Set Targets
Yes
Targets
| Target | Base Year | Target Year | Target Change (%) |
|---|---|---|---|
| Reduction of water withdrawal | 2,023 | 2,026 | 8 |
Water — Performance & Outcomes
Has Performance Results
Yes
Performance Description
Wastewater Management
Operational Approach
Regularly inspect and control the wastewater treatment system to maintain its effectiveness and ensure that the wastewater quality meets the specified standards. Develop the wastewater treatment system for maximum efficiency to maximize water reuse. Use treated water for watering plants in the company's gardens.
Operational Results
Treat wastewater from the factory to meet the wastewater quality standards set by the Department of Industrial Works and pass the inspection by the Provincial Industrial Office. Reuse treated water for purposes such as cleaning buildings and watering plants.
Waste Management — Overview
Introduction
Waste and refuse generated from business operations are the responsibility of TRUBB to manage in accordance with legal requirements. Waste and refuse generated from TRUBB's business activities can be classified into 3 types that must be properly managed before being disposed of off-site as follows:
• Hazardous waste from concentrated latex and skim rubber production, including rubber starch waste and chemical packaging.
• Non-hazardous waste, such as household waste.
• Wastewater from production, including wastewater and sludge from treatment ponds.
Waste — Plan & Guidelines
Has a Waste Management Plan
Yes
Plan Description
Guidelines for the disposal of waste and waste by type of THAITEX
Hazardous waste that must be disposed of only as required by law.
Type: Hazardous waste generated from product manufacturing, such as rubber sheet residue and sediment from treatment ponds. Management: Collect and send for disposal at hazardous waste disposal points that are legally certified.
Type: Hazardous waste, packaging type, various chemicals
Management: Collect and send for disposal at hazardous waste disposal points that are legally certified.
Non-hazardous waste
Type: Non-recyclable waste
Management: Send to the municipality for disposal by landfill or incineration, depending on the readiness to support waste management in each area.
Type: Recyclable waste
Management: Donate to create a fabric from waste project with the community or sell to buyers to recycle and reuse in factories, such as beverage bottles used as equipment for checking latex concentration or cleaning equipment in factories.
Type: Food waste, organic waste, wet waste
Management: Use as animal feed or make green cones for composting, collect, and deliver to the municipality for disposal.
Waste — Generation, Disposal & Recycling
Waste Generation, Disposal & Recycling
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Total waste generated (Kilograms) | 108,725.16 | 82,463.4 | 89,600.4 |
| Non-hazardous waste (Kilograms) | 107,945.16 | 82,172.4 | 89,600.4 |
| Non-hazardous waste - Landfilling (Kilograms) | 106,495.46 | 79,946 | 89,600.4 |
| Non-hazardous waste - Incineration (with energy recovery) (Kilograms) | |||
| Non-hazardous waste - Incineration (without energy recovery) (Kilograms) | 1,449.7 | 2,226.4 | |
| Non-hazardous waste - Other disposal operations (Kilograms) | |||
| Hazardous waste (Kilograms) | 780 | 291 | |
| Hazardous waste - Landfilling (Kilograms) | |||
| Hazardous waste - Incineration (with energy recovery) (Kilograms) | |||
| Hazardous waste - Incineration (without energy recovery) (Kilograms) | |||
| Hazardous waste - Other disposal operations (Kilograms) | 780 | 291 | |
| Total reused/recycled waste (Kilograms) | 3,871.4 | 4,618.7 | 2,020 |
| Reused/Recycled non-hazardous waste (Kilograms) | 3,871.4 | 4,618.7 | 2,020 |
| Reused non-hazardous waste (Kilograms) | |||
| Recycled non-hazardous waste (Kilograms) | 3,871.4 | 4,618.7 | 2,020 |
| Reused/Recycled hazardous waste (Kilograms) | |||
| Reused hazardous waste (Kilograms) | |||
| Recycled hazardous waste (Kilograms) |
Waste — Targets
Introduction
Objectives
2030: Zero landfill.
2030: Increase recycled waste by 30%.
Operational Guidelines
• Campaign to raise employee awareness of the impacts of garbage, waste, and pollution.
• Adhere to the 3R principles of waste management (Reduce, Reuse, Recycle) to minimize waste and waste generation.
• Improve production processes to minimize waste generation.
• Manage hazardous waste in accordance with the law, from internal storage to disposal outside the factory.
• Regularly install, control, and inspect the wastewater management system, and do not discharge water into public areas.
• Prepare reports on the sorting of each type of waste and its utilization.
Has Set Targets
Yes
Targets
| Waste Type | Disposal Approach | Target | Base Year | Target Year | Target Year Value | Target Change (%) |
|---|---|---|---|---|---|---|
| Non-hazardous waste and hazardous waste | 2760 · Description: Landfilling | Reduce waste volume | 2,023 | 2,030 | 0 | |
| Non-hazardous waste | 2759 · Description: Recycle | Reduce waste volume | 2,023 | 2,030 | 30 |
Waste — Performance & Outcomes
Has Performance Results
Yes
Performance Description
Trash to Treasure Project
The Company has continuously implemented the Trash to Treasure project for the 2nd year, in accordance with the environmental management policy organized by the Listed Companies Association and KidKid Co., Ltd. This project aims to encourage and instill waste management awareness among employees, starting with waste sorting and adhering to the 3Rs principle to minimize waste generation. The sorted waste will be utilized to its fullest potential. The Company has collected data on the amount of waste by type, with staff recording the information monthly for statistical purposes. This data is then used to analyze and plan waste reduction activities, aiming towards Zero Waste To Landfill in the future.
GHG — Plan & Guidelines
Has a GHG Management Plan
Yes
Plan Description
To continuously reduce greenhouse gas emissions, be a part of mitigating the impact of climate change on business activities. Show your commitment to reducing greenhouse gas emissions by 2030 in accordance with the United Nations guidelines.
GHG — Emissions
GHG Emissions
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Total GHG emissions (Metric tonnes of carbon dioxide equivalent) | 19,068 | 20,467 | 7,449 |
| Total greenhouse gas emissions 1 (Metric tonnes of carbon dioxide equivalent) | 1,164 | 1,069 | 786 |
| Total greenhouse gas emissions 2 (Metric tonnes of carbon dioxide equivalent) | 5,389 | 6,324 | 6,663 |
| Total greenhouse gas emissions 3 (Metric tonnes of carbon dioxide equivalent) | 12,515 | 13,074 | 0 |
GHG — Emissions Verification
Emissions Verified by a Third Party
Yes
Verifying Body
2656
Verifying Body — Please Specify
Energy and Economics Research Unit, Chiang Mai University
GHG — Targets
Introduction
Target
2030: Carbon Neutral
2050: Net Zero
In managing greenhouse gases to achieve Net Zero in 2050 in accordance with the United Nations' collaboration, it is necessary to identify sources of greenhouse gas emissions from business operations. This information will serve as a basis for planning emission management to mitigate the impact on climate change. Therefore, TRUBB has identified key projects that need to be implemented to achieve this goal in the future.
Has Set GHG Targets
Yes
GHG Targets — Net Zero
Net Zero Targets
| Emission Scope | TGO Certification | Base Year | Base Year Emissions | Near-term Target Year | Near-term Target Value | Near-term Target Change (%) | Long-term Target Year | Long-term Target Value | Long-term Target Change (%) | Target Year | Target Year Emissions | Target Change (%) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2717 | Net zero pathway | 2,023 | 20,467 | 2,030 | 14,327 | 30 | 2,050 | 12,280 | 40 | 2,030 | 14,327 | 30 |
GHG Targets — Carbon Neutrality
Carbon Neutrality Targets
| Emission Scope | Carbon Neutrality Certified | Certifying Body | Base Year | Base Year Emissions | Target Year | Target Year Emissions | Target Change (%) |
|---|---|---|---|---|---|---|---|
| 2716 | Y | Thailand Greenhouse Gas Management Organization | 2,023 | 20,467 | 2,030 | 14,327 | 30 |
GHG — Performance & Outcomes
Has Performance Results
Yes
Performance Description
Corporate Carbon Footprint Certification Performance Results 2024
The company has been certified for its corporate carbon footprint by the Energy and Environment Management Research Unit, Chiang Mai University, from 2023 to the present. The scope of the data reporting is as follows:
Scope 1
- Greenhouse gas emissions from stationary combustion, such as fuel oil/gas for machinery. Forklifts, Dumpers, Lawn Mowers
- Greenhouse gas emissions from mobile combustion, such as cars and trucks.
- Greenhouse gas emissions from leaks and other sources (Fugitive Emission) such as refrigerants, septic tanks, and industrial waste disposal.
Scope 2
- Purchase of electricity from external sources
Scope 3
- Indirect greenhouse gas emissions from purchased raw materials (Purchased goods and services)
- Indirect greenhouse gas emissions from fuel and energy related activities.
- Indirect greenhouse gas emissions from upstream transportation and distribution.
- Indirect greenhouse gas emissions from downstream transportation and distribution.
Product Carbon Footprint
In 2023, the company received carbon footprint certification for 15 products, effective from November 26, 2023 to November 26, 2026. The details are as follows:
- 60% DRC Concentrated Latex, High Ammonia Type 197 gCO2e
- 60% DRC Concentrated Latex, Medium Ammonia Type 96 gCO2e
- 60% DRC Concentrated Latex, Low Ammonia Type 193 gCO2e
- 60% DRC Concentrated Latex, High Ammonia Type, Packed in 205 liter tanks 408 gCO2e
- 60% DRC Concentrated Latex, Medium Ammonia Type, Packed in 205 liter tanks 408 gCO2e
- 60% DRC Concentrated Latex, Low Ammonia Type, Packed in 205 liter tanks 405 gCO2e
- 60% DRC Concentrated Latex, Double Centrifuge 265 gCO2e
- 60% DRC Concentrated Latex, Homogenized, High Ammonia Type 196 gCO2e
- 60% DRC Concentrated Latex, Homogenized, Low Ammonia Type 185 gCO2e
- 60% DRC Concentrated Latex, Very Low Ammonia Type 193 gCO2e
- High Modulus Latex Compound 197 gCO2e
- Medium Modulus Latex Compound 197 gCO2e
- Low Modulus Latex Compound 197 gCO2e
- Skim Rubber 583 gCO2e
- Ribbed Smoked Sheet 513 gCO2e
Environmental Legal Incidents
Legal Violation Incidents
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Number of cases or incidents of legal violations or negative environmental impact (cases) | 0 | 0 | 0 |
Other Environmental Management
Introduction
Air Pollution Management
In the concentrated latex and skim rubber production process, the use of heat and chemical mixing are steps in the production process. TRUBB attaches importance to the quality of the air released to the public and controls the odor of chemicals to prevent impacts on the surrounding community. The company focuses on managing and controlling air quality both inside and outside the factory, as well as regularly measuring and monitoring air quality. This ensures that TRUBB's production does not pollute or impact society, in accordance with legal requirements.
Plan Description
Guidelines for air pollution management
• Use Ammonia Pack Tower to trap ammonia odor to prevent odor. In the part of the skim rubber, there is an odor treatment system using a Wet scrubber to reduce odor from the skim rubber baking process.
• Use a Wet Scrubber system to trap small dust particles, both PM 10 and PM 2.5, from boilers before releasing them into the atmosphere.
• The concentrated latex and skim rubber production buildings are managed as a closed system to prevent odor nuisance from being released outside the factory.
• Install wind direction measuring instruments as well as carry out monitoring and inspection annually.
• Air pollution and odor nuisance risk assessments are conducted to prevent risks and impacts that may occur to the community surrounding the factory.
Targets
• Air quality from the chimney meets the air quality standards as prescribed by law.
• No complaints about unpleasant odors from the community around the factory.
Performance results for 2024
• The quality meets the legal requirements.
• No complaints from the community.
Employees — Plan & Guidelines
Introduction
1. Fair Employee Compensation
- Adjust the compensation structure to be in line with the labor market and labor skills.
- Regularly monitor and evaluate compensation and follow up on complaints of unfair treatment in wage payments.
2. Employee Training and Development
- Support the development of new skills and specialized knowledge for employees.
- Promote continuous learning programs such as online training, learning from media or channels of various educational institutions, and knowledge-sharing training by personnel within the organization.
- Organize study visits on quality development, technology, and sustainability development with external agencies.
3. Promoting Employee Relations and Engagement
- Organize activities that promote teamwork, such as workshops or group activities.
- Open channels for employees to participate in providing feedback on various developments.
4. Migrant/Foreign Workers
- Provide training to ensure that migrant/foreign workers understand labor rights, grievance procedures, and company regulations correctly.
5. Child Labor
- Establish a clear policy to prevent child labor in the organization and regularly monitor or track violations throughout the value chain.
6. Occupational Safety and Health
- Install safety systems in the workplace according to safety standards and strictly enforce employees to use personal protective equipment (PPE) regularly.
- Organize training or annual safety and health week activities for employees at all levels.
- Reduce workplace accidents by setting a goal of zero accidents.
Has an Employee Management Plan
Yes
Plan Description
Employees and Workforce
Comply with human rights principles, labor laws, and other relevant labor laws from recruitment to employee and personnel care to ensure that all employees and personnel feel a sense of belonging to the organization. In 2024, the company has implemented key employee-related initiatives:
Employment of People with Disabilities
According to the Promotion and Development of the Quality of Life of Persons with Disabilities Act, B.E. 2550, employers with 100 or more employees are required to employ people with disabilities at a rate of 1% of the total number of employees. In 2024, the company had a total of 634 employees and employed people with disabilities as follows:
Employees with disabilities under Section 33 * Total of 4 people.
Employees with disabilities under Section 35 * Total of 2 people.
Total of 6 people.
Note: * Calculated from the number of employees as of October 2024.
Compensation Payment
In 2024, the company allocated employee compensation by position fairly as follows:
Total compensation for all employees is 177,052,240.67 Baht.
Total compensation for male employees is 101,084,225.30 Baht.
Percentage of total male employee compensation is 57.09%.
Total compensation for female employees is 75,968,015.37 Baht.
Percentage of total female employee compensation is 42.91%.
Average compensation for all employees is 280,145.95 Baht/person.
Average compensation for male employees is 280,789.51 Baht/person.
Average compensation for female employees is 279,294.17 Baht/person.
Employee Skills Development Training
In 2024, the company organized training courses to enhance the skills and work potential of 62.53% of all employees, exceeding the target of 50%.
Average training hours per employee.
- Year 2022: 6 hours/person/year
- Year 2023: 8.95 hours/person/year
- Year 2024: 11.92 hours/person/year
Training and Development Expenses
- Year 2022: 197,206.00 Baht
- Year 2023: 195,875.00 Baht
- Year 2024: 420,222.50 Baht
Provide training on occupational safety, hygiene, and work environment.
The health, safety, and well-being of employees and workers is one of the issues that the company places great importance on because it has an impact and influence on stakeholders, including the loss of labor and may affect the quantity of output. The company has therefore set strict standards and monitors all operations to ensure occupational health and safety to international standards.
Employee Safety, Occupational Health, and Work Environment are as follows:
Total working hours of all employees.
- Year 2022: 1,524,800 hours
- Year 2023: 1,524,240 hours
- Year 2024: 1,511,744 hours
Number of employee injuries or accidents resulting in work stoppage.
- Year 2022: 15 times
- Year 2023: 23 times
- Year 2024: 13 times
Total number of employees who have been injured at work to the point of taking at least 1 day of leave.
- Year 2022: 15 people
- Year 2023: 17 people
- Year 2024: 13 people
Percentage of employees who have been injured at work to the point of taking at least 1 day of leave.
- Year 2022: 2.29%
- Year 2023: 2.50%
- Year 2024: 2.06%
Number of employees who died from work-related causes.
- Year 2022: 0 people
- Year 2023: 0 people
- Year 2024: 0 people
Percentage of employees who died from work-related causes.
- Year 2022: 0%
- Year 2023: 0%
- Year 2024: 0%
Annual Health Check
to employees to be aware of their health or the impact of their work, to be aware of annual accident statistics or health impacts from work in many aspects such as location, nature of occurrence (vehicle, confined space, height, chemical, electrical, odor/vapor, slippery or uneven surfaces, etc.), type of occurrence (personal error/negligence, incomplete area or equipment, not wearing protective equipment), and severity level.
Provision of Personal Protective Equipment
The company continuously develops and improves the efficiency of its safety operations to reduce the risk of illness, injury, or death, and to take care of the quality of life of employees or workers appropriately. There were zero fatalities from duty in 2024. In addition, the company has purchased PPE such as safety glasses, face shields, rubber gloves, and safety shoes for employees to wear to replace damaged equipment and to add to areas where it is deemed to help prevent accidents.
Employee Engagement
The company conducts an annual employee satisfaction survey to gather information for planning and improvement in the following years. The topics used to survey employee satisfaction in each area are as follows:
1. Work Performed
2. Work System
3. Rewards and Motivation
4. Incentive System
5. Supervisors
6. Subordinates
7. Workplace Environment
8. Information and Communication
9. Feeling of Pride in the Company
10. Cooperation and Coordination within the Company
11. Company Rules and Regulations
12. Overall Job Satisfaction with the Company
13. Production/Product Quality Management
Employee Attitude Survey Project in the Concentrated Latex Group, Summary of Employee Engagement Level, Year 2024
- Head Office: Satisfaction Level (%) Very Good 28.83, Good 41.34, Moderate 24.71, Low 24.71, Very Low 0.63: Average Satisfaction 3.93
- Factory: Satisfaction Level (%) Very Good 20.46, Good 50.46, Moderate 24.03, Low 4.09, Very Low 0.96: Average Satisfaction 3.95
- Overall Average: Satisfaction Level (%) Very Good 23.25, Good 47.43, Moderate 24.26, Low 4.22, Very Low 0.85: Average Satisfaction 3.88
In 2024, TRUBB conducted an employee engagement survey with the following satisfaction results:
- Employees affiliated with the head office are mostly at a good level (4), accounting for 47.43%. The average satisfaction score is 3.93%, an increase of 0.10% from 2023.
- Employees affiliated with the factory are at a good level (4), accounting for 50.46%. The average satisfaction score is 3.85%, a decrease of 0.19% from 2023.
Workforce Planning
1. Fair Employee Compensation
- Adjust the compensation structure to be in line with the labor market and labor skills.
- Regularly review and evaluate compensation and follow up on complaints of unfair treatment in pay.
2. Employee Training and Development
- Support the development of new skills and specialized knowledge for employees.
- Promote continuous learning programs such as online training, learning from media or channels of educational institutions, and knowledge-sharing training by personnel within the organization.
- Organize study visits on quality development, technology, and sustainability development with external agencies.
3. Promoting Employee Relations and Engagement
- Organize activities that promote teamwork, such as workshops or group activities.
- Open channels for employees to participate in providing suggestions for various developments.
4. Migrant/Foreign Labor
- Provide training to ensure that migrant/foreign workers understand labor rights, grievance procedures, and company regulations correctly.
5. Child Labor
- Establish a clear policy to prevent child labor in the organization and regularly monitor or track violations throughout the value chain.
6. Occupational Safety and Health
- Install safety systems in the workplace according to safety standards and strictly enforce the use of Personal Protective Equipment (PPE) by employees.
- Organize training or annual safety and health week activities for employees at all levels.
- Reduce workplace accidents by setting a target of zero accidents.
Plan Areas
| Plan Area |
|---|
| Fair employee compensation |
| Employee training and development |
| Promoting employee relations and participation |
| Migrant/foreign labor |
| Child labor |
| Occupational health and safety in workplace |
Employees — Workforce
Workforce Data
| Metric | Current Year | Previous Year | Two Years Ago | Remark |
|---|---|---|---|---|
| Total number of employees (Persons) | 632 | 678 | 656 | |
| Number of male employees (Persons) | 360 | 383 | 364 | |
| Number of female employees (Persons) | 272 | 295 | 292 | |
| Total employment of disabled persons (people) | 6 | 6 | 6 | Information as of October 2023 |
| Total disabled employees (people) | 4 | 4 | 4 | |
| Total male disabled employees (people) | 3 | 3 | 3 | |
| Total female disabled employees (people) | 1 | 1 | 1 | |
| Total disabled workers who are non-employee (people) | 2 | 2 | 2 | |
| Contributions to the fund for promoting and improving the quality of life for disabled persons | 1 | 0 | 0 | |
| Total number of male employees in operational level (Persons) | 346 | 366 | 347 | |
| Total number of male employees in management level (Persons) | 9 | 11 | 11 | |
| Total number of male employees in executive level (Persons) | 5 | 6 | 6 | |
| Total number of female employees in operational level (Persons) | 255 | 277 | 277 | |
| Total number of female employees in management level (Persons) | 16 | 17 | 14 | |
| Total number of female employees in executive level (Persons) | 1 | 1 | 1 |
Employees — Remuneration & Provident Fund
Remuneration & Provident Fund
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Total disabled employees (people) | 177,052,240.67 | 233,412,869 | 224,680,271 |
| Total male employee remuneration (Baht) | 101,084,225.3 | 147,501,917 | 145,526,644 |
| Total female employee remuneration (Baht) | 75,968,015.37 | 85,910,952 | 79,153,627 |
| Total number of employees joining employee provident fund (Persons) | 189 | 203 | 201 |
| Percentage of total number of employees joining employee provident fund to total number of employees (%) | 29.91 | 29.94 | 30.64 |
| Total amount of provident fund contributed by the Company (Baht) | 3,770,387 | 3,891,056 | 3,593,354 |
Employees — Training & Development
Training Data
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Average employee training hours (Hours / Person / Year) | 11.92 | 8.95 | 6 |
| Employee development and training expenses (baht) | 420,222.5 | 195,875 | 197,206 |
Employees — Occupational Health & Safety
Occupational Health & Safety Data
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Total number of lost time injury incidents by employees (Cases) | 13 | 23 | 15 |
Employees — Labour Relations
Labour Relations Data
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Total voluntary resignations (Persons) | 51 | 130 | 150 |
| Male employees who voluntary resigned (Persons) | 33 | 89 | 105 |
| Female employees who voluntary resigned (Persons) | 18 | 41 | 45 |
| Percentage of employee turnover leaving the Company voluntarily (%) | 8.07 | 19.17 | 22.87 |
| Evaluation result of employee engagement | 1 | 1 | 1 |
Employees — Employee Representation
Employees Are Represented Collectively
Yes
Forms of Representation
| Form |
|---|
| Welfare committee |
Employees — Targets
Has Set Employee Targets
Yes
Targets
| Indicator | Target Areas | Base Year | Target Year | Target Year — Description |
|---|---|---|---|---|
| - Compensation structure aligned with labor market and employee skills - Reduction in compensation payment issues | 2983 · Description: Fair employee compensation | 2,023 | 2,032 | - Compensation structure aligned with labor market trends and employee skills, covering 100% of employees at all levels.
- Zero compensation-related complaints. |
| { "average_training_hours_per_employee_per_year": "Average training hours per employee per year", "number_of_learning_programs_provided": "Number of learning programs provided, such as online training or knowledge sharing activities" } | 2984 · Description: Employee training and development | 2,023 | 2,032 | - Average training hours per employee: 12 hours/year
- Number of learning programs provided, such as online training or knowledge sharing activities, covering 100% of employees at all levels |
| { "employee_engagement_score": "Employee Satisfaction Score on Engagement", "num_internal_engagement_activities": "Number of Internal Engagement Activities" } | 2985 · Description: Promoting employee relations and participation | 2,023 | 2,032 | Success |
| - Number of migrant workers trained on labor rights and company regulations - Increased awareness rate of migrant workers' rights | 2986 · Description: Migrant/foreign labor | 2,023 | 2,032 | The proportion of migrant workers who have received training or knowledge about labor rights and company regulations is 100%. |
| { "labor_child_case_count": 0, "labor_child_monitoring_process": "string" } | 2987 · Description: Child labor | 2,023 | 2,032 | - There were 0 cases of child labor identified.
- Monitoring and remediation of child labor violations within the value chain cover 100%. |
| - Workplace accident rate (reduced) - Rate of complete personal protective equipment (PPE) usage - Number of safety and occupational health training activities provided | 2988 · Description: Safety and occupational health at work | 2,023 | 2,032 | - 100% Personal Protective Equipment (PPE) usage rate (within the workplace and during activities with potential hazards).
- 100% completion rate for safety and occupational health training as required by law and regulations, and organization of 3 activities per year to promote knowledge and awareness of occupational safety. |
Employees — Performance & Outcomes
Has Performance Results
No
Customers — Plan & Guidelines
Has a Customer Management Plan
Yes
Plan Description
Creating customer satisfaction with products and services is an important factor that affects the company's operating performance, especially in the current situation where the market remains volatile due to the imbalance of market demand and supply. Along with increasing trade regulations, as well as the trend of increasing trade competition, the company may lose its ability to retain its core customer base. The company therefore focuses on creating customer satisfaction with products and services closely, along with developing products and services, including standards in various aspects of the company to meet customer needs and in line with the circular economy, reducing pollution, including greenhouse gases throughout the life cycle of the product, including trade regulations. In order for the company to be able to appropriately adjust its sales plan and be able to retain its existing customer base and increase its new customer base even more.
Therefore, the company has conducted a customer satisfaction survey to develop its operations annually, which consists of 3 aspects: satisfaction with product quality, service of company personnel, product delivery process, and complaints to be improved and resolved to achieve operational goals.
Objective
To create maximum customer satisfaction and build lasting customer relationships.
Operational Procedures for Opinion Surveys to Develop Customer Relationships
1. Plan operations to create continuous customer satisfaction.
2. Conduct customer satisfaction surveys annually.
3. Once feedback from customers has been received, the company will use the information to measure and evaluate customer satisfaction in order to find strengths and weaknesses in operations.
4. The company will use these issues to develop and improve to achieve the goals set each year.
Guidelines for Customer Relationship Development
1. Product quality
1.1 The factory manufactures products that meet company and customer specifications.
1.2 Regularly review customer requirements to make improvements to meet customer needs.
1.3 There is a process to check the quality of products to meet the specifications before delivery to customers every time.
1.4 Improve and develop new products to meet customer needs by the Research and Development (R&D) team.
2. Service and quality of company personnel
Service is the most important part that affects the quality of service because the service provider interacts directly with the service recipient. Therefore, importance should be given to personnel management to ensure that they have the appropriate characteristics for providing services. Thus,
2.1 Personality: Dress neatly, be polite, and have good manners. Respect customers.
2.2 Organize training for employees to develop knowledge of product quality and sales techniques to enhance employee skills for advancement.
2.3 Provide marketing information, rubber situation, and prices to customers regularly.
2.4 Provide initial technical advice on product use in case customers encounter problems.
2.5 There are experts who can provide advice and solve problems related to usage.
3. Product delivery process
3.1 Train delivery staff to dress politely and speak politely to customers.
3.2 Confirm the delivery schedule with the customer before shipping.
3.3 Check products and documents for correctness before shipping.
3.4 Deliver products on time.
3.5 Schedule work and prepare transportation vehicles.
3.6 Prepare enough transportation service vehicles to meet the transportation needs of each round.
4. Complaint Management
4.1 Upon receiving a complaint from a customer, the marketing and sales department reviews the problem.
4.2 Make a customer complaint form stating various details.
4.3 Send customer complaint forms to relevant units to investigate the cause of the problem, including preventing recurrence of the problem, specified in the customer complaint form.
4.4 The relevant unit sends the customer complaint form back to the marketing and sales department to be completed within 5 business days.
4.5 The marketing and sales department will immediately notify the customer.
Customer Complaints
There were a total of 2 customer complaints in 2024.
1. Found contaminants in the latex.
Problem Solving: The problem has been solved and preventive measures have been found.
2. The factory did not close the IBC lid tightly, causing the latex to splash out of the IBC.
Problem Solving: The problem has been solved and preventive measures have been found.
The company has set a goal of developing customer relationships/satisfaction in 2025 as follows:
- Customer satisfaction survey results in Thailand and abroad are not less than 85 percent and 90 percent, respectively.
- No quality complaints from domestic and foreign customers.
Plan Areas
| Plan Area |
|---|
| Development of customer satisfaction and customer relationship |
Customers — Satisfaction Results
Customer Satisfaction Results
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| Evaluation results of customer satisfaction | 1 | 1 | 1 |
Customers — Targets
Has Set Customer Targets
Yes
Targets
| Indicator | Target Areas | Base Year | Target Year | Target Year — Description |
|---|---|---|---|---|
| Customer satisfaction in 2023: - Domestic customers: 80% - International customers: 90% | 3009 · Description: Development of customer satisfaction and customer relationship | 2,023 | 2,024 | Able to achieve customer satisfaction in 2024 to meet the set target, as follows:
- Domestic customers 80%
- International customers 90% |
Customers — Performance & Outcomes
Has Performance Results
Yes
Performance Description
Summary of the 2024 Satisfaction Survey Results
- In 2024, the customer response rate for the survey was 91.66% for domestic customers and 46.66% for international customers. These are reliable rates, and the data can be used to improve future operations.
- Customer satisfaction domestically in 2024 was 90%, exceeding the target of 80%. Customers were satisfied with product quality, sales services, attentiveness, assistance, problem-solving by salespeople, and delivery services.
- Customer satisfaction from abroad in 2024 was 90%, meeting the target of 90%. Customers were satisfied with product quality, sales services, and logistics.
Community & Social — Plan & Guidelines
Has a Community & Social Plan
Yes
Plan Description
- Community Survey Project: The company has planned to conduct community surveys annually, starting from 2023 onwards.
- The EUDR Traceability Project conducts surveys of rubber farmers' areas and promotes the EUDR rubber operation plan to establish standards in agriculture and elevate trade, increasing trading opportunities for the community.
- The Thai Rubber Solution Project promotes a happy society and a healthy environment by focusing on creating sustainable benefits for the community.
- The CSR Project supports activities in the sub-district/district/province by providing support in terms of personnel, factors, and equipment for organizing various activities within the community surrounding the factory annually.
Plan Areas
| Plan Area |
|---|
| Employment and professional skill development |
| Education |
| Religion and culture |
| Forests and natural resources |
| Sports and recreation |
| Occupational health, safety, health, and quality of life |
| Disadvantaged and vulnerable groups |
| Reducing inequality and promoting social equality |
Community & Social — Targets
Has Set Community & Social Targets
Yes
Targets
| Indicator | Target Areas | Base Year | Base Year — Description | Target Year | Target Year — Description |
|---|---|---|---|---|---|
| - Level of impact on the community from the company's operations in the past year - Number of complaints from the community | 3036 · Description: Employment and professional skill development · 3037 · Description: Education · 3038 · Description: Religion and culture · 3039 · Description: Forests and natural resources · 3040 · Description: Sports and recreation · 3041 · Description: Occupational health, safety, health, and quality of life · 3042 · Description: Disadvantaged and vulnerable groups | 2,023 | - The community is not impacted by the company's operations, both environmentally and socially.
- There have been fewer than three complaints from the community. | 2,030 | - The community is not impacted by the company's operations, both environmentally and socially.
- There have been no complaints from the community. |
Community & Social — Performance & Outcomes
Has Performance Results
Yes
Performance Description
- Community Survey Project: Operational Results. The survey, conducted in 2017, explored the impacts, concerns, expectations, and suggestions from communities surrounding five factories. The findings revealed that the majority experienced no impact.
- EUDR Traceability Project: Operational Results. The company conducted site visits to rubber plantations of key suppliers to promote and invite farmers to participate in the EUDR traceability project. Currently, over 1,500 farmers have joined the project.
- Thai Rubber Solution for a Happy Society and Vibrant Environment Project: The rubber plantations of Ban Mae Lak Noen Thong School and Ban Thap Kumarn Thong School faced significant declines in rubber yields in 2016-2017 compared to the previous year. This decline was attributed to the El Nino phenomenon during the summer of 2016, which brought high temperatures and a lack of rainfall from Songkran until May. This was followed by the La Nina phenomenon, characterized by unusually heavy and continuous rainfall from July to September 2017. Consequently, the schools' income from rubber sales was insufficient to purchase fertilizers for the rubber trees and replace damaged rubber collection cups. Therefore, Ban Mae Lak Noen Thong School and Ban Thap Kumarn Thong School are requesting support from the company to provide fertilizers and rubber collection cups.
- CSR Project: Operational Results. In 2017, the company carried out 39 CSR activities, providing budget, equipment, and manpower support for events in each sub-district/district/province. These activities included: Children's Day gift-giving, sponsoring the 22nd Jomsawan Sub-district Public Sports Competition, donating water tanks, providing computers for education, participating in a recycled waste temple fair to support the Ban Rai Sub-district Municipality's waste fund, volunteering for community development in honor of Her Royal Highness Princess Maha Chakri Sirindhorn's birthday, "Care the Whale" beach cleanup, providing equipment for people with mobility impairments, campaigning for accident prevention during the New Year, volunteering for Father's Day 2017, and landscaping public roads behind the factory and along Khun Talee Lake.
Law Violation Incidents
Law Violation Incidents
| Metric | Current Year | Previous Year | Two Years Ago |
|---|---|---|---|
| The total number of cases or incidents of significant violations of laws or regulations regarding social and human rights (Cases) | 0 | 0 | 0 |
| The total number of cases or incidents that cause significant labor disputes (Cases) | 0 | 0 | 0 |
| The total number of cases or complaints related to consumer rights violations (Cases) | 0 | 0 | 0 |
| The total number of cases or complaints related to partner rights violations (Cases) | 0 | 0 | 0 |
| The total number of cases or incidents that cause disputes with the community/society (Cases) | 0 | 0 | 0 |
| The total number of cases or incidents related to cyber security or customer data breaches (Cases) | 0 | 0 | 0 |
| The total number of cases or incidents related to safety and occupational health at work (Cases) | 0 | 0 | 0 |

